Skip to navigation
Skip to content
Navigation
OpenWrt | OpenWrt Attitude Adjustment 12.09 | Load: 0.11 0.10 0.07
| Auto Refresh:
on
off
Changes: 0
Status
System
Network
Logout
Interfaces
Wifi
Switch
DHCP and DNS
Hostnames
Static Routes
Firewall
Diagnostics
Java Script required!
You must enable Java Script in your browser or LuCI will not work properly.
Interfaces - WAN
On this page you can configure the network interfaces. You can bridge several interfaces by ticking the "bridge interfaces" field and enter the names of several network interfaces separated by spaces. You can also use
VLAN
notation
INTERFACE.VLANNR
(
e.g.
:
eth0.1
).
Common Configuration
General Setup
Advanced Settings
Physical Settings
Firewall Settings
Create / Assign firewall-zone
lan:
lan:
wan:
wan:
unspecified -or- create:
Choose the firewall zone you want to assign to this interface. Select
unspecified
to remove the interface from the associated zone or fill out the
create
field to define a new zone and attach the interface to it.
Bridge interfaces
creates a bridge over specified interface(s)
Interface
Ethernet Switch: "eth0"
VLAN Interface: "eth0.1" (
lan
)
VLAN Interface: "eth0.2" (
wan
)
Wireless Network: Unknown "OpenWrt" (
lan
)
Wireless Network: Unknown "OpenWrt" (
lan
)
Custom Interface:
Status
eth0.2
Uptime:
0h 24m 59s
MAC-Address:
64:66:B3:F4:1D:5C
RX
: 644.21 KB (8715 Pkts.)
TX
: 1.53 MB (3497 Pkts.)
IPv4:
192.168.178.42/24
Protocol
Static address
DHCP client
Unmanaged
PPP
PPtP
PPPoE
PPPoATM
UMTS/GPRS/EV-DO
L2TP
Hostname to send when requesting DHCP
Bring up on boot
Use broadcast flag
Required for certain ISPs, e.g. Charter with DOCSIS 3
Use default gateway
If unchecked, no default route is configured
Use DNS servers advertised by peer
If unchecked, the advertised DNS server addresses are ignored
Use gateway metric
Client ID to send when requesting DHCP
Vendor Class to send when requesting DHCP
Override MAC address
Override MTU
Powered by LuCI 0.11.1 Release (0.11.1)